Samskruti College of Engineering and Technology – Admission, Courses, Fees Structure, Facilities, Training and Placements, Contact Details

Scholarship Examination in India

About Samskruti College of Engineering and Technology

Samskruti College of Engineering and Technology, in its 14 years of existence, is a reputed institution in the State of Telangana. The College follows the University norms and has required number of faculty in both ratio and cadre wise. Samskruti College of Engineering and Technology has emerged into a center of excellence in engineering education.

Founded in 2005 by st.Vincent Educational Society, Samskruti College of Engineering and Technology represents a rich tradition of excellence in technology-based education. A premier-league institution among the affiliates of JNTUH University,

Samskruti Engineering, Polytechnic, Pharmacy and Business Management Institutions are located in pollution free environment and natural surroundings at Kondapur Village, Ghatkesar Mandal, Medchal Dist (old Ranga Reddy Dist). It is 1 Kilometer away from the Hyderabad-Warangal highway near by Ghatkesar and 18 kms from Secunderabad/Hyderabad and connected by TSRTC Bus Routes from various prominent localities of Twin Cities.

 

Samskruti College of Engineering and Technology Admission 

Admissions are made as per rules / guidelines prescribed by the Telangana State Council of Higher Education (TSCHE) and JNTUH.

  • 70 percent seats are filled by the TSEAMCET/ICET/TSECET/TSPGECET Convener as per TS Government rules.
  • 30 percent of seats are filled by the management only on merit basis.

Seats are open for all eligible candidates and also to the candidates who belongs to the other states and Union Territories of India and NRIs, who are qualified in entrance and those who are not qualified in entrance but are having 50% in aggregate in qualified exam are eligible for the Admission.

 

Samskruti College of Engineering and Technology provides the following Courses

I Under Graduate Courses (B.Tech.)

TSEAMCET Counseling Code: SMSK

 

II Post Graduate Courses (M.Tech.)

GATE/ PGECET Counseling Code: SMSK

 

III) M.B.A.

ICET Counseling Code: SMSK

 

 

Department of Samskruti College of Engineering and Technology

  1. Department of Humanities and Sciences

The Department came into existence in the year 2005 when the college was started. The Department comprises of seven disciplines namely, English, Mathematics, Physics, Chemistry, Environmental Sciences, Physical Education and Library Sciences. The prime focus of the department is to provide a conceptual base in Basic Sciences which forms a foundation to the Engineering subjects and it is instrumental in grooming the students into competent Engineers and individuals through training in Soft Skills to compete for global opportunities. In view of the rapid development of knowledge and the technological changes, the department seeks to strengthen itself by integrating it with the engineering departments for a productive knowledge base. The department has been encouraging the conduct of workshops and seminars to enable the faculty to keep abreast of the knowledge and methodologies in the respective fields of research.

 All the first year students are administered by the H&S Department. It is a full fledged Department consisting of experienced and well qualified members of faculty in their subjects and committed to their profession.

Laboratories for Physics, Chemistry and English language are fully equipped with modern equipment to meet the requirements of the syllabus and replenished as and when necessary.

The Department is quite active in conducting Workshops, Extensive Lectures in addition to the regular teaching schedule to create awareness and zeal in the students. Apart from preparing the students for higher courses, the department takes a major lead in demonstrating and enabling students to imbibe leadership qualities.

 

2.  Department of Electronics and Communication

Electronics and Communication Engineering (ECE) is a swiftly advancing field, with new ideas emerging every other second. From mobile phones to fiber optics and remote sensing, there are exciting avenues to explore and create. The ECE department at Samskruti College of Engineering and Technology prepares students for careers in this constantly evolving discipline.

The Department of ECE is best known for its talented and dedicated professionals renowned for their excellence in various specializations in the field of Electronics & Communication. The department is provided with state of the art technological tools incorporated in all the existing laboratories. For the last ten years the students of the ECE, who walked out of the portals of the institute successfully, holding their degrees, were immediately inducted into the MNCs of high reputation in India & abroad. The augmentation of the intake of the department from 60 to 120 in the year 2006.

 

3. Department of Electrical and Electronics Engineering 

Electrical and Electronics Engineering(EEE) is a branch of science which deals with the applications of Electricity, Electronics, and Electromagnetism. Electrical and Electronic Engineers harness one of the fundamental forces of the universe, electromagnetism, for the benefit of the world. Electrical Engineers create systems to provide power for homes and industry. It focuses on giving students practical training to work in laboratories, project and group work. These engineers are responsible for designing, developing and testing electrical equipment.

The Department of ELECTRICAL AND ELECTRONICS ENGINEERING was established with the outset of the institution in 2006 with an intake of 60 B.Tech .The two year M.Tech course has been started in 2011 with Electrical Power Systems as specialization with an intake of 18 students. The Department of EEE in Samskruti, with its epoxy team of faculty members, imparts education to bachelors (B.Tech – ELECTRICAL AND ELECTRONICS ENGINEERING), Masters (M.Tech – Electrical Power Systems)

The tasks of today’s electrical engineers are versatile. All areas of life are affected by Electrical Engineering.The Department regularly organizes seminars, workshops, and guest lecturers for the students. Faculty Development Programs(FDP) are organized for faculty to promote high standards in technical education.

The teaching staff members are dedicated and determined to learn new things and Samskruti College of Engineering and Technology focus on molding the students to become technically sound professionals who will contribute various solutions to the society through engineering.

 

4. Department of Civil Engineering

Civil engineering has the potential to build a strong economy and so more multinational companies and engineers are showing their interests to be involved with this industry Civil engineering industry focuses areas like soil mechanics, surveying and material sciences . Civil engineering specifically deals with the activities of designing and construction of structures like dams, bridges, canals, harbors, roads, tunnels, and water-supply systems, power plants, aircraft, water-treatment plants etc.

Civil Engineering is a broad field of Engineering that deals with the needs of the society around the globe has created a lot of scope for the Civil Engineering professionals. Civil Engineering is a Professional engineering discipline and it is the Mother branch of Engineering that deals with the design, construction and maintenance of the physical and naturally built environment, including works such as bridges, roads, canals, dams and buildings. It is traditionally broken into several sub-disciplines including Environmental Engineering, Geotechnical Engineering, Structural Engineering, Transportation Engineering, Water Resources Engineering, Coastal Engineering, Surveying and Construction Engineering.

The Department of Civil Engineering was established in the year 2009. The Department offers a four-year UG course leading to B.Tech and a PG course leading to Structural Engineering. Overall intake for B.Tech is 120 and for M.Tech (Structural Engineering) is 24.  The department organizes various seminars, workshops, industrial training to the students to create awareness on real time works. The department creates a platform for faculties and students to come together and think innovatively and move with their research.

 

5. Department of Mechanical Engineering 

Mechanical Engineering is often called the  Mother of all Engineering. The Department of Mechanical Engineering was established in the year 2009 at the time of inception of Department with an initial intake of 60 students and an additional section of 60 is added in 2013. The Department is also offering  Post Graduate Programme, M.Tech in Thermal Engineering with an intake of 24 in the year 2012. The Department has 15 eminent faculty supported by 06 Technical Staff.

The Department has well Equipped Laboratories confirming to the norms of JNTUH with  facilities viz., a CNC lathe, Solar flat plate collector, Concentric tube collector etc and software like AUTOCAD, HIGH END CONFIGURATION SYSTEMS, ANSYS,  FLUENT  etc.

 

 

Samskruti College of Engineering and Technology Fee Structure

 

 

Facilities provided by Samskruti College of Engineering and Technology

1. Central Library

spacious library in more than 10000 Sq.ft area has thousands of volumes & title which is more than stipulated by AICTE. The library subscribes international & national journals and has an access to scores of e-journals.

Central Library

Digital Library

The Digital Library having 30 Computers connected on LAN allows browsing the Internet for Academic Purpose. The Library has IEL and Del Net,N-Digital ,IEEE online subscription through which one can access specialized bibliographic database of books and Journals. The media room of Digital Library also has 1805general educational CDs and 475 SONET CDs.

 

Library OPAC: Online Public Access Catalogue
Through this catalogue one can search the Library database to know the status of the Library Book. One can search this OPAC by entering the Name of the Title, Name of the Author, Call Number and Accession Number of the Book.

 

Department Libraries

In addition to the Central Library, every department has department library. All important text/reference books are maintained in the departmental libraries for the use of faculty and students

Book Bank Scheme
420 students opted for book bank scheme for the year 2008-12 which costs Rs 2500 for the entire course. This scheme runs on the premise that each student should posses at least one text book for each subject throughout his/her 4 years of study to go through the standard text books only to get more knowledge. Therefore Huge number of students are availing this facility.

Benefits to Students
A single, one-time payment ensures the availability of the best textbooks for each subject throughout his four years of study.

Books are handed over to the student at the college library.

The presence of textbooks improves the student’s academics and enhances the performance in internal and external examinations.

 

2. Auditorium

The campus has an auditorium with air conditioned where the cultural events, annual days, meetings, inter-college events are held.

 

3. Seminar Hall

The seminar hall in the college is equipped withSmart board, Clarity Visualizer, Lecturn, a system with projection and latest Audio and Visual equipments for the conduct of Presentations, Seminars and personality development workshops.It is fully air conditioned. It has the capacity for accommodating 120 persons. It hosts the meetings, small seminars lectures, guest lectures, general classroom lectures, and all other extracurricular events of the college such as, Group discussions, Paper Presentations, Poster Presentations, Debates, Elocutions and list goes on.

 

4. ATM Facility

For the convenience of the students and staff and to save their valuable time, the college provides facility of ATM.College has Union Bank of India  ATM CENTER with in the campus providing services to Students and Staff and also the people from adjoining villages.

 

5. Sports and Games

Samskruti College of Engineering and Technology encourages students to participate in Sports and Games giving importance to physical education as well as encouraging student’s interests. A professional physical director is appointed by the management to train students in their field of interest. All Infrastructure facilities for sports and Games are funded by the Samskruti College of Engineering and Technology Management. It encourages students by conducting special events annually that includes encouraging students by rewarding them through conducting tournaments etc.

Samskruti involved in the concentration of sports activities of the students and staff members, Students are encouraged to take part in various kinds of physical activities to keep their body and mind strong and alert. Samskruti has Separate Sports Center inside the campus. Our students regularly participate in all sports competitions and bring credits to the institution.

Besides the academic activities Students would like together attention relieved and focused on fun and physique. Sports activities help the students to keep them fit both mentally and physically. Our sports complex is a marvel in itself boasting of cricket grounds, volley ball courts, basket ball courts, Throwball courts, kabaddi and athletic tracks. Another added facility is indoor sports complex with a fully equipped gym.

 

6. Internet Facilities

College is having a 64 Mbps Internet connection, locally networked and connected through the central server is available for students for their project work and preparing seminar presentations. It also access to e-books, study materials, previous question papers, teaching schedules, internal marks, attendance, daily circulars, etc. through the college Local Area Network. The facility is available to students.

 

7. Cafeteria

Ask anyone about their fond memories and it would be to go back to their days in college. And no college life is complete without the hours spent at everyone’s favourite spot – the canteen.

Samskruti College has spacious canteen facility in the college premises. A variety of south indian food and snack items are provided to the students.

Adequate seating facilities are provided to accomodate students and staff even during peak time. The Canteen has a big kitchen with steam cooking facility and kitchen staff take extra care to maintain hygiene. Food items are prepared with RO treated water.

 

8. Entrepreneurship Development Cell

Mission

Develop Institutional Mechanism To Create Entrepreneurial Culture in Academic Institutions to Faster Growth Of Innovation and Entrepreneurship Among the Faculty and Students.

Objectives

  1. To motivate students to undergo Entrepreneurship Development Program (EDP), skill development training and enhance self-employment opportunities.
  2. To reach Science & Technology to the participants and motivate them to take up entrepreneurial ventures.
  3. To organize seminars/ guest lectures / workshops/ industrial visits.
  4. To transfer the technical know-how and assist the students in setting up entrepreneurial enterprises.
  5. Carrying out study to find out the entrepreneurial potential of region in selected industries.

The Entrepreneurship Development Cell (EDC) has been established with the financial assistance of The All India Council for Technical Education (AICTE), New Delhi. The EDC team aims at working as Catalysts, Organisers, Promoters and Integrators for the overall development of entrepreneurial skills and abilities among the participants in their programmes.The EDC conducts programme like EDP-I (Entrepreneurship Awareness Camp) and EDP-II (Entrepreneurship Development Programme) for students and others.

9. Transport

College has its own fleet of buses flying from all the corners of twin cities. They are comfortable and safe. Apart from the college buses, a number of TSRTC buses reaching the college well in time and a bus stop available at the college.

 

 

 

Samskruti College of Engineering and Technology Training and Placements 

Training and Placement Cell is an integral part of the institute. The institution has provided complete infrastructure for effective functioning of the cell. The various activities, which are being undertaken regularly are – placement of the students, Entrepreneurship awareness & development programmes, invited lectures of the persons from industry & other institutions, Personality development programmes etc. Training activities are organized throughout the year in an effort towards preparing the prospective students for the campus selection programmes. The cell keeps on inviting various industries for campus recruitment.

The Training and Placement Cell functions with the primary aim of placing students in better companies just before they complete their courses. The Placement & Training cell goes all out to train the students to meet industry expectations. Having an exposure to a good work culture is the beginning of their professional life, guarantees success in all their endeavors. The students trained in this institute are well prepared to handle any responsibility.

The Institute’s competitiveness is calibered by its Training & Placement cell. Our T & P cell provides a strategic advantage to students in terms of rich industrial exposure. We have a proactive Training and Placement Cell to guide the students and establish interface with industry for the placement of students.

The Cell works in co-ordination with the industries giving the students requisite direction and resources to secure their industrial training and dream jobs. To address the demands of modern education, prominent academicians and Industrialists constantly enlighten the students through seminars. Every Semester, our students undergo 5-6 week trainings.

The Placement cell Offers assistance to the students to get placed in jobs besides arranging implant training and project course work in industries and research institutions. Till date around 75% of our students have been placed through our Placement Cell in companies namely Accenture, TCS, IBM, Wipro, CTS, Infosys, SIFY, L&T, Siemens, Marshall Technologies, CSS Corporation, Spur technologies , ECIL , Sathyam, Allsec, Sutherland Syntel etc.

Our Strengths:

The highest number of students meeting the eligibility criteria for recruitment, as well as the highest passes percentage in the University examinations. Pre-placement training to the students is given to make them ‘Plug & Play’ in industry in the areas of Technical knowledge. Our Campus has high Potential to place 100% of the eligible students.

Activities:

All final year students are exposed / trained in the following areas:

  • Career Awareness sessions
  • Model Aptitude tests, Mock Group discussions & Interviews to excel in the Recruitment process
  • Guidance sessions for higher studies
  • Arranging In-plant training, Industrial visits, Projects, Guest lectures and other Industry-
  • Institute interaction activities

To enable the students to make the best of the opportunities we provide, students are put through rigorous corporate readiness programmes which run concurrent to their academic programs.These comprise of Industry visits, mentorship activity, field research work, corporate interface and faculty monitored corporate internship programs.

The College has fully fledged “Career Development Center “which looks after the student Placement affairs and provides assistance to the students for Career Development. The Career Development center takes care of the student’s right from the time of admission, help them to
understand their potential, and guide them to launch themselves in successful careers. Special training for developing communication skills and personality development is provided to the The College is a member of the National Entrepreneurship Network (NEN), which educates and supports the next generation of entrepreneurs in India .Plenty of opportunities are provided for guiding the students who wish to be self-employed.

The center also assists the students for higher studies in India and Abroad.

The CDC functions from an independent Office with facilities such as

  • Seminar Hall
  • Class rooms for written tests
  • Facility for online test for 200 students at a time
  • Separate interview and GD rooms
  • Placement Cell.

Contact details of Samskruti College of Engineering and Technology

Address: Keesara-Bogaram-Ghatkesar Road,
Kondapur,
Telangana 501 301,
Phone: 097013 68992

Print Friendly, PDF & Email

Leave a Reply

Your email address will not be published. Required fields are marked *