Bihar Combined Entrance Competitive Examination (BCECE) | BCECE Applicaion Date | BCECE Eligibility | BCECE Pattern | BCECE Syllabus

Scholarship Examination in India

Bihar Combined Entrance Competitive Examination (BCECE) is a state level entrance exam conducted by BCECE Board each year. The students who attend BCECE are eligible to get admission into engineering, pharmacy, agriculture and many other fields offered by the various institutions of Bihar. There are two stages in BCECE, i.e. in Stage1 and Stage2. The students who complete the two stages are eligible to apply for the two above mentioned courses. Further details are provided below:

BCECE Eligibility | Eligibility Criteria for BCECE Applicants

The candidates must look for the following information to check if they are eligible for the Bihar Combined Entrance Competitive Examination

  • The candidate must be a citizen of India.
  • The candidate must have domicile of the Bihar state
  • The parents of the candidate must be the permanent residents of the state of Bihar.
  • Candidates those parents working in the state, but living outside of the Bihar are also eligible to apply.
  • There is no limit in the age of applicants for the engineering and pharmaceutical examination.
  • For engineering examination applicants following eligibility criteria are applicable:
  • Candidate must pass 10+2 or equivalent exam from a recognized board.
  •  A candidate from any of the reserved category should pass with a minimum 45% marks and 40% marks in the respective subjects.
  • The qualifying exam should pass with Physics, Chemistry & Mathematics.
  • Final year candidates can also apply with one condition that they should have passed the qualifying exam before the counselling.
  • For Pharmacy course examination applicants the following eligibility criteria are applicable:
  • Candidate must pass 10+2 or equivalent exam from a recognized board.
  •  A candidate from any of the reserved category should pass with a minimum 45% marks and 40% marks in the respective subjects.
  • The qualifying exam should pass with Mathematics, Physics and Chemistry for Pharmacy.
  • Final year candidates can also apply with one condition that they should have passed the qualifying exam before the counselling.
  • The optional subjects are also required such as Biotechnology, Biology and technical vocational subject.

BCECE Application | How to apply for BCECE

BCECE Application Form 2019- Bihar Combined Entrance Competitive Examination Board (BCECEB) will release the application form of BCECE 2019 in online mode tentatively in the first week of March. Candidates will have to fill all the details required in BCECE 2019 application form and submit it on or before the last date. It is advisable to keep the photograph and other documents to be uploaded ready before filling the BCECE application form 2019. Candidates appearing for BCECE must ensure that they fill all the details correctly and submit the application form before the deadline. In case of any errors, correction facility of the application form will be available for the candidates. Candidates should take a print out of the application form of BCECE 2019 for future reference, however, there is no need to send it to the authorities. Read the full article to know all the details regarding BCECE 2019 application form.

Candidates can refer to the steps given below to fill the application form of BCECE 2019:

Step 1- Registration- The first step is to register online by clicking on the “Apply for BCECE 2019” button. Candidates will have to enter the following details for registration.

  • Name of Exam: BCECE-2019
  • Select Course group
  • Name
  • Date of Birth
  • Are you a permanent resident of Bihar
  • Reservation Category
  • Do you claim disabled quota
  • Email ID
  • Password: Password length should be 8-20. (It must contain at least one letters, one number and one special character).
  • Mobile No. of the Applicant:
  • Aadhaar Card No
  • Security Question
  • Security Answer
  • Captcha Code

After the successful registration candidates will be sent an “Activation Code” to their registered mobile number and email id. The activation code will have to enter for validation of the registration. Candidates can then login by entering their email id and password to fill the rest of the details.

Step-2- Entering the Personal Information- The next step is to log in and enter the personal details. The following details will have to be entered in this step:

  • Father’s name
  • Mother’s name
  • Mark of identification
  • Gender
  • Did the candidate claim service man Quota
  • Is the father’s annual income less than 4.5 lakh
  • Do you claim for the agriculture stream course
  • Have you passed matriculation with Urdu as a subject
  • District name of the institution of passing
  • District name and permanent address

Step-3- Uploading of Photograph and Signature

The scanned images of the photograph and signature have to be uploaded in the prescribed format.

Document/ ImageDetails
Photograph
  • Must be taken after January 1, 2019
  • Must be in colour or black & white
  • Size is 3.5 x 4.5 cm in size
  • Scanning resolution should be within 100 dpi
  • File size should be less than 100 KB
  • File format must be JPEG or JPG only
  • Name and date of the photograph must be mentioned beneath the photo
Signature in Hindi and English
  • Must be in black or blue ink
  • File size should be less than 100 KB
  • File format must be JPEG or JPG only
  • Must not be in Capital letters

Step 4- Filling of academic details- In this step candidates are required to fill the following details regarding the educational qualifications.

  • Class X college name, year of passing, board and passing status
  • Class XII college name, year of passing, board and passing status

After the details are keyed in, candidates must save and submit the form.

Step 5- Preview the BCECE Application Form 2019- In this step any errors made in the application form can be corrected before the final submission. Candidates will have to use the edit button to edit the details and then click on update button to save the details. After ensuring that all the details are correct, the application form of BCECE 2019 has to be finally submitted.

Step 6- Application Fee Payment-
Candidates will have to pay the required application fee in either online or offline mode. The fee in online mode can be paid through debit card/ credit card or net banking. However, for offline payment, candidates will have to get a bank challan made.

BCECE Application Fee

S.No.CategoryPCMPCMB
1General/ Backward/ Extremely BackwardRs. 1000Rs. 1100
2SC/ ST/ PWDRs. 500Rs. 550

Step 7 – Submission and Downloading of Application Form- Candidates will have to download the filled application form in Part A and B and take its print out. This printout of the application form has to be kept with candidates for future use as it will be required during counselling.

BCECE 2019 Application Form Correction Facility

The board will provide the correction facility to rectify the errors made in the application form of BCECE 2019 tentatively in the second week of April. Candidates can make the use of this opportunity to correct any mistakes they have made within the stipulated time period. Once the correction facility gets closed, candidates will not able to edit any information.

What after BCECE Application Form 2019?

After the completion of the application process, the admit card will be generated for the candidates. The admit card of BCECE 2019 will be released online tentatively in the third week of April. Candidates will have to download the admit card and take a print out as it is a mandatory document to appear in the entrance examination.

BCECE Documents | Documents Required for BCECE exam application

You need to bring the following original documents along with a set of photocopies to the allotted institute for verification:

  • Final BCECE 2018 Seat Allotment Letter
  • Admit card of BCECE 2018
  • 6 photographs (identical/ matching to the photographs used in BCECE 2018 Admit Card).
  • Counselling Call Letter of BCECE 2018
  • Admit Card, Mark Sheet and Provisional Certificate of 10th standard or equivalent examination (as proof of age and identity)
  • Admit Card, Mark Sheet and Passing Certificate of I.S.C or equivalent examination (only Admit Card in case of candidates appearing in the qualifying examination)
  • A certificate mentioning the subjects and clearly stating that result of this examination has not been announced by the Principal of the Institution Concerned. (in case of candidates appearing in the qualifying examination)
  • Caste Certificate to be obtained from Concerned C.O. countersigned by DM or SDO (Civil) of permanent residence (if applicable)
  • Annual Income Certificate to be obtained from Concerned C.O. countersigned by DM or SDO (Civil) of permanent residence. (if applicable)
  • Self attested latest photographs of the candidate.
  • Part-A of Application Form properly filled in by the candidate along with photograph pasted on it.
  • Domicile Certificate to be obtained from Concerned C.O. countersigned by DM or SDO (Civil) of permanent residence.
  • Character Certificate to be obtained from the Head of the Institution last attended.
  • Certificate for Disabled Quota (if applicable)
  • Certificate for Serviceman’s Quota (SMQ) mentioning the relationship with the candidate (if applicable)
  • Certificate showing that candidate’s parent is an employee of UNO and is posted at present in Bihar. (if applicable)
  • Certificate showing that candidate’s parent is a Govt. of India or any PSU employee and is posted in Bihar. (if applicable)
  • Certificate showing that candidate’s parent is a Govt. of Bihar employee. (if applicable)
  • Refugee Registration Certificate to be obtained from Concerned DM or ADM authorized by DM or Refugee Registration Officer.
  • Certificate for candidates who have not studied from Bihar but claim to be a citizen for 10 years or more in respect of their parents from the Principal of the Institution from where they are studying for the qualifying examination indicating the Permanent Address as recorded in the Admission Register of that institute.
  • Medical Certificate as specified

Important Examination Dates

Those who are willing to apply for the examination must keep the following application dates in mind:

Main EventsDates 2019
Availability of Online application formFebruary 2nd week
Last date of online application submissionMarch 1st week
Last date of submission of  application form hard copyMarch 3rd week
Admit card Release DateJune 1st week
First Stage Examination DateJune 3rd week
Result Declaration DateJuly 3rd week
Counselling DateJuly Last week

BCECE Syllabus | Syllabus for applicants those who are taking BCECE Examination

Bihar Combined Entrance Competitive Examinations Board will release the syllabus of BCECE 2019. Candidates preparing for the entrance exam must refer to the BCECE 2019 syllabus, before starting the preparation. BCECE syllabus 2019 will include the topics and units from Mathematics, Physics, Chemistry and Biology. The question asked in the entrance exam will be framed from the prescribed syllabus of BCECE 2019. Knowing BCECE 2019 syllabus beforehand will help candidates to prepare for the entrance exam in a better and planned way. Along with knowing the syllabus, candidates are advised to go through the exam pattern of BCECE 2019 thoroughly. BCECE is conducted in offline mode tentatively in April. Candidates appearing for the entrance exam must know the marking scheme, number, type and nature of the questions etc, along with knowing the syllabus of BCECE 2019. To know in detail about the BCECE 2019 syllabus, read the full article:

Candidates appearing for BCECE 2019 can check the detailed syllabus from the tables given below. The syllabus of BCECE 2019 will carry topics and units from Physics, Mathematics, Chemistry and Biology that candidates need to study to crack the entrance exam.

Chemistry syllabus covered in BCECE 2019,

Some basic concepts of Chemistry :
General Introduction : Importance and scope of chemistry. Historical approach to particulate nature of matter, laws
of chemical combination, Dalton’s atomic theory; concept of elements, atoms and molecules, Atomic and molecular
masses. Mole concept and molar mass; percentage composition, empirical and molecular formula; chemical
reactions, stoichiometry and calculations based on stoichiometry.
Structure of Atom :
Discovery of electron, proton and neutron and their characteristics; atomic number, Isotopes & Isobars, Thomson’s
model and its limitation, Rutherford’s model and its limitations, Bohr’s model and its limitations, concept of shells
and subshells, dual nature of matter and light, De Broglic’s relationship, Heisenberg uncertainty principle, concept
of orbitals, Quantum numbers, shapes of S.P. and D orbitals, rules, for filling electrons in orbitals Aufbau principle,
Pauli exclusion principle and Hund’s rule, electronic configuration of atoms, stability of half filled and completely
filled orbitals.

Classification of Elements and Periodicity in Properties:
Significance of classification, brief history of the development of periodic table, modern periodic law and the present
form of periodic table, periodic trends in properties of elements – atomic radii, ionic radii, ionization enthalpy,
electron gain enthalpy, electro negativity, valence.
Chemical Bonding and Molecular Structure :
Valence electrons, ionic bond, covalent bond, bond parameters, Lewis structure, polar character of covalent bond,
Covalent characters of Ionic bond, valence bond theory, resonance, geometry of covalent molecules, VSEPR
theory, concept of hybridization involving s, p and d orbitals and shapes of some simple molecules, molecular
orbital, theory of homonuclear diatomic molecules (qualitative idea only). Hydrogen bonding.
States of Matter : gases and liquids :
Three states of matter, Intermolecular interactions, type of bonding, melting and boiling points. Role of gas laws in
elucidating the concept of the molecule, Boyle’s law, Charle’s law, Gay Lussac’s law Avogadro’s law, Ideal behaviour,
empirical derivation of gas equation. Avogadro’s number. Ideal gas equation. Derivation from ideal behaviour,
liquification of gases, critical temperature.
Liquid State – Vapour pressure, viscosity and surface tension (qualitative idea only, no mathematical derivations).

Thermodynamics :
Concepts of system, types of systems, surroundings, work, heat, energy, extensive and intensive properties, state
functions, First law of thermodynamics – internal energy and enthalpy, heat capacity and specific heat, measurement
of ?U and ?H, Hess’s law of constant heat summation enthalpy of : bond dissociation, combustion, formation,
atomization, Sublimation, phase transformation, ionization and solution.
Introduction of entropy as a state function, free energy change for spontaneous and non-sponteneous process,
criteria for equilibrium.
Equilibrium :
Equilibrium in physical and chemical processes dynamic nature of equilibrium, law of mass action, equilibrium
constant, factors affecting equilibrium – Le Chatelier’s principle; ionic equilibrium – ionization of acids and bases,
strong and weak electrolytes, degree of ionization, concept of pH. Hydrolysis of salts (elementary idea), buffer
solutions, solubility product, common ion effect (with illustrative examples).

Redox Reactions :
Concept of oxidation and reduction, redox reactions, oxidation number, balancing redox reactions, applications of
redox reactions.
Hydrogen :
Position of hydrogen in periodic table, occurrence, isotopes, preparation, properties and uses of hydrogen; hydrides
– ionic, covalent and interstitial; physical and chemical properties of water, heavy water; hydrogen peroxide –
preparation, reactions and structure; hydrogen as a fuel.
s-Block Elements (Alkali and Alkaline earth metals):
Group 1 and Group 2 elements :
General introduction, electronic configuration, occurrence, anomalous properties of the first element of each group,
diagonal relationship, trends in the variation of properties (such as ionization enthalpy, atomic and ionic radii)
trends in chemical reactivity with oxygen, water, hydrogen and halogens; uses.
Preparation and properties of some important compounds :
Sodium carbonate, sodium chloride, sodium hydroxide and sodium hydrogen carbonate, biological importance of
sodium and potassium.
CaO, CaCO3
and industrial use, lime and limestone. Biological importance of Mg and Ca.
Some p-Block Elements
General Introduction p-Block Elements
Group 3 elements : General introduction, electronic configuration, occurrence, Variation of properties, oxidation
states, trends in chemical reactivity, anomalous properties of first element of the group; Boron-physical and chemical
properties, some important compounds : borax, boric acids, boron hydrides. Aluminium : uses, reactions with acids
and alkalies.
Group 4 elements : General introduction, electronic configuration, occurrence, variation of properties, oxidation
states, trends in chemical reactivity, anomalous behaviour of first element, Carbon – catenation, allotropic forms,
physical and chemical properties; uses of some important compounds : oxides. Important compounds of Silicon
and a few uses: Silicon tetrachloride, silicons, silicates and zeolite. (Part-I)

Organic Chemistry – Some Basic Principles and Techniques :
General introduction, methods of qualitative and quantitative analysis, classification and IUPAC nomenclature of
organic compounds.
Electronic displacements in a covalent bond; inductive effect, electromeric effect, resonance and hyper conjugation.
Hemolytic and heterolytic fission of a covalent bond: free radicals, carbocations, carboanions; electrophiles and
nucleophiles, types of organic reactions.
Hydrocarbons :
Classification of hydrocarbons :
Alkanes – Nomenclature, isomerism, conformations (ethane only), methods of preparation, physical properties,
chemical reactions including halogenation, free radical mechanism, combustion and pyrolysis.
Alkenes – Nomenclature, structure of double bond (ethane), geometrical isomerism, methods of preparation, physical
properties, chemical reaction : addition of hydrogen, halogen, water, hydrogen halides (Markovnikov’s addition
and peroxide effect), ozonolysis, oxidation, mechanism of electrophyllic addition.
Alkynes – Nomenclature, structure of triple bond (ethyne), methods of preparation, physical properties, chemical
reactions; acidic character of alkynes, addition reactions of hydrogen, halogenes, hydrogen halides and water.
Aromatic hydrocarbons – Introduction, IUPAC nomenclature, Benzene : resonance, aromaticity : methods of
preparation, chemical properties.
Mechanism of electrophilec substitution – nitration, sulphonation, halogenation, Friedal Craft’s alkylation and
acylation; directive influence of functional group in mono-substituted benzene; carcinogenicity and toxicity.
Environmental Chemistry :
Environmental pollution – Air, water and soil pollution, chemical reactions in atmosphere smogs, major atmospheric
pollutants : acid rain, ozone and its reactions, effects of depletion of ozone layer, greenhouse effect and global
warming – pollution due to industrial wastes, green chemistry as an alternative tool for reducing pollution, strategy
for control of environmental pollution.
* Solid State
Classification of solids based on different binding forces : molecular, ionic covalent and metallic solids, amorphous
and crystalline solids (elementary idea), unit cell in two dimensional and three dimensional lattices, calculation of
density of unit cell, packing in solids, voids, number of atoms per unit cell in a cubic unit cell, point defects, electrical
and magnetic properties.
Solutions
Types of solutions, expression of concentration of solutions of solids in liquids, solubility of gases in liquids, solid
solutions, colligative properties–relative lowering of vapour pressure, elevation of Boiling Point, depression of
freezing point, osmotic pressure, determination of molecular masses using colligative properties, abnormal molecular
mass.

Electrochemistry
Redox reactions, conductance in electrolytic solutions, specific and molar conductivity variations of conductivity
with concentration, Kohlrausch’s law, electrolysis and laws of electrolysis (elementary idea), dry cell-electrolytic
cells and Galvanic cells; lead accumulator, EMF of a cell, standard electrode potential, Nernst equation and its
application to chemical cells, fuel cells; corrosion.
Chemical Kinetics
Rate of a reaction (average and instantaneous), factors affecting rates of reaction; concentration, temperature,
calatyst; order and molecularity of a reaction; rate law and specific rate constant, integrated rate equations and half
life (only for zero and first order reactions); concept of collision theory (elementary idea, no mathematical treatment)

Surface Chemistry
Adsorption – physisorption and chemisorption; factors affecting adsorption of gases on solids; catalysis: homogenous
and heterogeneous, activity and selectivity: enzyme catalysis; colloidal state: distinction between true solutions,
colloids and suspensions; lyophilic, lyophobic, multimolecular and macromolecular colloids: properties of colloids;
Tyndall effect, Brownian movement, electrophoresis, coagulation; emulsion – types of emulsions.
General Principles and Processes of Isolation of Elements
Principles and methods of extraction – concentration, oxidation, reduction electrolytic method and refining; occurrence
and principles of extraction of aluminium, copper, zinc and Iron.
p-Block Elements
Group – 5 elements : General introduction, electronic configuration, occurrence, oxidation states, trends in physical
and chemical properties; nitrogen – preparation, properties and uses; compounds of nitrogen: preparation, properties
and uses; compounds of nitrogen: preparation and properties of ammonia and nitric acid, oxides of nitrogen (structure
only); Phosphorous-allotropic forms; compounds of phosphorous: preparation and properties of phosphine, halides
(PCl3, PCl5) and oxoacids (elementary idea only).
Group – 6 elements : General introduction, electronic configuration, oxidation states, occurrence, trends in physical
and chemical properties; dioxygen: preparation, properties and uses; simple oxdides; Ozone, Sulphur-allotropic
forms; compounds of sulphur: preparation, properties and uses of sulphur dioxide; sulphuric acid: industrial process
of manufacture, properties and uses, oxoacids of sulphur (structures only).
Group – 7 elements : General introduction, electronic configuration, oxidation states, occurrence, trends in physical
and chemical properties; compounds of halogens; preparation, properties and uses of chlorine and hydrochloric
acid, interhalogen compounds, oxoacids of halogens (structures only).
Group – 8 elements : General introduction, electronic configuration. Occurrence, trends in physical and chemical
properties, uses. (Part-II)
d- and f- Block Elements
General introduction, electronic configuration, occurrence and characteristics of transition metals, general trends
in properties of the first row transition metals – metallic character, ionization enthalpy, oxidation states, ionic radii,
colour, catalytic property, magnetic properties, interstitial compounds, alloy formation. Preparation and properties
of K2Cr2O7 and KMnO4.
Lanthanoids – electronic configuration, oxidation states, chemical reactivity and lanthanoid contraction.
Actinoids – Electronic configuration, oxidation states.
Coordination Compounds
Coordination Compounds – Introduction, ligands, coordination number, colour, magnetic properties and shapes,
IUPAC nomenclature of mononuclear coordination compounds, bonding; isomerism, importance of coordination
compounds (in qualitative analysis, extraction of metals and biological systems).
Haloalkanes and Haloarenes
Haloalkanes: Nomenclature, nature of C-X bond, physical and chemical properties, mechanism of substitution
reactions.
Haloarenes: Nature of C-X bond, substitution reactions (directive influence of halogen for monosubstituted
compounds only)
Uses and environmental effects of – dichloromethane, trichloromethane, tetrachloromethane, iodoform, freons,
DDT.
Alcohols, Phenols and Ethers
Alcohols : Nomenclature, methods of preparation, physical and chemical properties (of primary alcohols only);
identification of primary, secondary and tertiary alcohols; mechanism of dehydration, uses of methanol and ethanol.
Phenols : Nomenclature, methods of preparation, physical and chemical properties, acidic nature of phenol,
electrophillic substitution reactions, uses of phenols.
Ethers : Nomenclature, methods of preparation, physical and chemical properties, uses.
Aldehydes, Ketones and Carboxylic acids
Aldehydes and Ketones : Nomenclature, nature of carbonyl group, methods of preparation, physical and chemical
properties mechanism of nucleophilic addition, reactivity of alpha hydrogen in aldehydes; uses.
Carboxylic Acids : Nomenclature, acidic nature, methods of preparation, physical and chemical properties; uses.
Organic compounds containing Nitrogen
Amines : Nomenclature, classification, structure, methods of preparation, physical and chemical properties, uses,
identification of primary, secondary and tertiary amines.
Cyanides and Isocyanides – will be mentioned at relevant places in context.
Diazonium salts : Preparation, chemical reactions and importance in synthetic organic chemistry.
Biomolecules
Carbohydrates – Classification (aldoses and ketoses), monosaccahrides (glucose and fructose), oligosaccharides
(sucrose, lactose, maltose), polysaccharides (starch, cellulose, glycogen); importance.
Proteins – Elementary idea of a – amino acids, peptide bond, polypeptides proteins, primary structure, secondary
structure, tertiary structure and quaternary structure (qualitative idea only), denaturation of proteins; enzymes.
Vitamins – Classification and functions.
Nucleic Acids: DNA & RNA.

Polymers
Classification – natural and synthetic, methods of polymerization (addition and condensation), copolymerization.
Some important polymers: natural and synthetic like polythene, nylon, polyesters, bakelite, rubber.
Chemistry in Everyday life:
1. Chemicals in medicines – analgesics, tranquilizers, antiseptics, disinfectants, antimicrobials, antifertility drugs,
antibiotics, antacids, antihistamines.
2. Chemicals in food – preservatives, artificial sweetening agents.
3. Cleansing agents – soaps and detergents, cleansing action.

Physics syllabus to be covered for BCECE 2019

Physical world and measurement
Physics : scope and excitement, nature of physical laws; Physics, technology and society.
Need for measurement : Units of measurement, systems of units. S.I. units, fundamental and derived units, length,
mass and time measurements, accuracy and precision of measuring instruments, errors in measurement, significant
figures, regular and irregular errors.
Dimensions of physical quantities, dimensional analysis and its applications.
Kinematics
Frame of reference, Motion in straight line, position time graph, speed and velocity. Uniform and non-uniform
motion, average speed and instantaneous velocity.
Uniformly accelerated motion, velocity time and position time graphs, relations for uniformly accelerated motion
(graphical treatment).
Elementary concepts of differentiation and integration for describing motion.
Scalar and vector quantities : Position and displacement vectors, general vectors and notation, equality of vectors,
multiplication of vectors by a real number, addition and subtraction of vectors, relative velocity.
Unit vector, Resolution of a vector in a plane-rectangular components.
Motion in a plane, Cases of uniform velocity and uniform acceleration – projectile motion, uniform circular motion.

Laws of Motion
Intutive concept of force, Inertia, Newton’s first law of motion, momentum and Newton’s Second law of motion,
impulse, Newton’s third law of motion, Law of conservation of linear momentum and its applications.
Equilibrium of concurrent forces, static and kinetic friction, laws of friction, rolling friction, lubrication, dynamics of
uniform circular motion : centripetal force examples of circular motion (vehical on level circular road, vehical on
banked road).
Work, Energy and Power
Scalar product of Vector work done by a constant force and a variable force, kinetic energy, work-energy theorem,
power.
Notion of potential energy, potential energy of a spring, conservative forces; conservation of mechanical energy
(Kinetic and potential energies), non conservative forces, elastic and inelastic collissions in one and two dimension.
Motion of System of Particles and Rigid body.
Centre of mass of two-particle system, momentum, conservation and centre of mass motion, centre of mass of a
rigid body, centre of mass of circular ring, disc, rod and sphere.
Vector product of vectors; momentum of a force, torque angular momentum, conservation of angular momentum
with some examples.
Equilibrium of rigid bodies, rigid body rotation and equations of rotational motion, comparison of linear and rotational
motion, moment of inertia, radius of gyration. Values of M.I. for simple gemoetrical objects (no derivation), statement
of parallel and perpendicular axes theorems and their applications.

Gravitation
Keplar’s laws of planetary motion, The universal law of gravitation, Acceleration due to gravity and its variation with
altitude and depth.
Gravitational potential energy, gravitational potential, escape velocity, orbital velocity of satellite, Geo-stationary
satellites.
Properties of Bulk Matter
Elastic behaviour, stress-strain relationship, Hooke’s law, Young’s modulus, Bulk modulus, Deformation, Shear
modulus of rigidity.
Pressure due to fluid column, pascal’s law and its applications / hydraulic lift and hydraulic brakes).
Effect of gravity on fluid pressure.
Viscocity, stoke’s law terminal velocity, Reynold’s number, Streamline and turbulent flow, Bernoulli’s theorem and
its applications. Surface energy and surface tension, angle of contact, application of surface tension, ideas to drop bubbles and
capillary rise.

Heat and Thermodynamics
Heat, temperature, thermal expansion, specific heat capacity, Calorimetry, change of state, latent heat.
Heat transfer – conduction, convection and radiation, thermal conductivity, Newton’s law of cooling.
Thermal equilibrium and definition of temperature (Zeroth law of thermodynamics). Heat, work and internal energy.

First law of thermodynamics.
Second law of thermodynamics, Reversible and irreversible processes. Heat engines and refrigerator.
Behaviour of Perfect Gas and Kinetic Theory
Equation of state of a perfect gas, work done on compressing a gas.
Kinetic theory of gases : Assumptions, concept of pressure, Kinetic energy and temperature, rms speed of gas
molecules, degrees of freedom, law of equipartition of energy (statement only) and application to specific heat
capacities of gases, concept of mean free path, Avogadro’s number.

Oscillations and Waves.
Periodic motion – period, frequency, displacement as a function of time, periodic functions, simple harmonic motion
(SHM) and its equation, phase, oscillation of a spring – restoring force and force constant energy in SHM – Kinetic
and potential energies, simple pendulum – derivation of expression for its time period) free, forced and damped
oscillations (qualitative ideas only), resonance.
Wave motion, Longitudinal and transverse waves, speed of wave motion, Displacement relation for progressive
waves, principle of superposition of waves, reflection of waves, standing waves in strings and organ pipes,
fundamental mode and harmonics, Beats, Doppler effect.

* Electrostatics
Electric Charge; Conservation of charge, Coulomb’s law-force between two point charges, forces between multiple
charges; superposition principle and continuous charge distribution.
Electric field; electric field due to a point charge, electric field lines; electric dipole, electric field due to a dipole;
torque on a dipole in uniform electric field.
Electric flux, statement of Gauss’s theorem and its applications to find field due to infinitely long straight wire,
uniformly charged infinite plane sheet and uniformly charged thin spherical shell (field inside and outside).
Electric potential, potential difference, electric potential due to a point charge, a dipole and system of charges;
equipotential surfaces, electrical potential energy of a system of two point charges and of electric dipole in an
electrostatic field.
Conductors and insulators, free charges and bound charges inside a conductor. Dielectrics and electric polarisation,
capacitors and capacitance, combination of capacitors in series and in parallel, capacitance of a parallel plate
capacitor with and without dielectric medium between the plates, energy stored in a capacitor. Van de Graaff
generator.

Current Electricity
Electric current, flow of electric charges in a metallic conductor, drift velocity, mobility and their relation with electric
current; Ohm’s law, electrical resistance, V-I characteristics (linear and non-linear), electrical energy and power,
electrical resistivity and conductivity. Carbon resistors, colour code for carbon resistors; series and parallel
combinations of resistors; temperature dependence of resistance.
Internal resistance of a cell, potential difference and emf of a cell, combination of cells in series and in parallel.
Kirchhoff’s laws and simple applications. Wheatstone bridge, metre bridge.
Potentiometer – principle and its applications to measure potential difference and for comparing emf of two cells;
measurement of internal resistance of a cell.
Magnetic effects of current & Magnetism
Concept of magnetic field, Oersted’s experiment.
Biot – Savart law and its application to current carrying circular loop.
Ampere’s law and its applications to infinitely long straight wire, straight and toroidal solenoids.
Force on a moving charge in uniform magnetic and electric fields. Cyclotron.
Force on a current-carrying conductor in a uniform magnetic field. Force between two parallel current-carrying
conductors-definition of ampere. Torque experienced by a current loop in uniform magnetic field, moving coil
galvanometer-its current sensitivity and conversion to ammeter and voltmeter.
Current loop as a magnetic dipole and its magnetic dipole moment. Magnetic dipole moment of a revolving electron.
Magnetic field intensity due to a magnetic dipole (bar magnet) along its axis and perpendicular to its axis. Torque
on a magnetic dipole (bar magnet) in an uniform magnetic field; bar magnet as an equivalent solenoid, magnetic
field lines; Earth’s magnetic field and magnetic elements. Para-, dia- and ferro- magnetic substances, with examples.
Electromagnets and factors affecting their strengths. Permanent magnets.
Electromagnetic Induction and Alternating currents
Electromagnetic induction; Faraday’s law, induced emf and current; Lenz’s Law, Eddy currents. Self and mutual
inductance.
Need for displacement current.
Alternating currents, peak and rms value of alternating current/ voltage; reactance and impedance; LC oscillations
(qualitative treatment only), LCR series circuit, resonance; power in AC circuits, wattless current.
AC generator and transformer.
Electromagnetic Waves
Electromagnetic waves and their characteristics (qualitative ideas only). Transverse nature of electromagnetic
waves.
Electromagnetic spectrum (radio waves, microwaves, infrared, visible, ultraviolet, X-rays gamma rays) including
elementary facts about their uses.

Optics
Reflection of light, spherical mirrors, mirror formula, Refraction of light, total internal reflection and its applications,
optical fibres, refraction at spherical surfaces, lenses, thin lens formula, lens-maker’s formula. Magnification, power
of a lens, combination of thin lenses in contact, Refraction and dispersion of light through a prism.
Scattering of light-blue colour of the sky and reddish appearance of the sun at sunrise and sunset.
Optical instruments; Human eye, image formation and accommodation, correction of eye defects (myopia,
hypermetropia, presbyopia and astigmatism) using lenses. Microscopes and astronomical telescopes (reflecting
and refracting) and their magnifying powers.
Wave optics: wave front and Huygens’ principle, reflection and refraction of plane wave at a plane surface using
wave fronts. Proof of laws of reflection and refraction using Huygens’ principle. Interference, Young’s double slit
experiment and expression for fringe width, coherent sources and sustained interference of light. Diffraction due to
a single slit, width of central maximum. Resolving power of microscopes and astronomical telescopes. Polarisation,
plane polarised light; Brewster’s law, uses of plane polarised light and Polaroids.
Dual Nature of Matter and Radiation
Photoelectric effect, Hertz and Lenard’s observations; Einstein’s photoelectric equation-particle nature of light.
Matter waves-wave nature of particles, de Broglie relation. Davission-Germer experiment.
Atoms and Nuclei
Alpha-particle scattering experiment; Rutherford’s model of atom; Bohr model, energy levels, hydrogen spectrum.
Composition and size of nucleus, atomic masses, isotopes, isobars; isotones, Radioactivity-alpha, beta and gamma
particles/rays and their properties; radioactive decay law. Mass-energy relation, mass defect; binding energy per
nucleon and its variation with mass number; nuclear fission and fusion.
Electronic Devices
Semiconductors; semiconductor diode – I-V characterstics in forward and reverse bias, diode as a rectifier; I-V
characteristics of LED, photodiode, solar cell, and Zener diode; Zener diode as a voltage regulator. Junction
transistor, transistor action, characterstics of a transistor; transistor as an amplifier (common emitter configuration)
and oscillator. Logic gates (OR, AND, NOT, NAND and NOR). Transistor as a switch.
Communication Systems
Elements of a communication system (block diagram only); bandwidth of signals (speech, TV and digital data);
bandwidth of transmission medium. Propagation of electromagnetic waves in the atmosphere, sky and space
wave propagation. Need for modulation. Production and detection of an amplitude-modulated wave.

Mathematics syllabus to be covered for BCECE 2019,

SETS AND FUNCTIONS
1. Sets:
Sets and their representations, Empty set, Finite & Infinite sets. Equal sets, Subsets, Subsets of the set of real
number especially intervals (with notations). Power set, Universal set, Venn diagrams, Union and Intersection of
sets, Difference of sets, Complement of a set.
2. Relation & Functions:
Ordered pairs, Cartesian product of sets, Number of elements in the Cartesian product of two finite sets. Cartesian
product of the reals with itself (upto R X R X R). Definition of relation, pictorial diagrams, domain, condomain and
range of a relation. Function as a special kind of relation from one set to another. Pictorial representation of a
function, domain, co-domain & range of a function. Real valued function of the real variable, domain and range of
these functions, constant, identity, polynomial, rational, modulus, signum and greatest integer functions with their
graphs, Sum, difference, product and quotients of functions.
3. Trigonometric Functions:
positive and negative angles. Measuring angles in radians & in degrees and conversion from one measure to
another. Definition of trigonometric functions with the help of unit circle. Truth of the identify sin2x + cos2 x = 1, for
all x. Signs of trigonometric functions and sketch of their graphs. Expressing sin (x + y) and cos (x + y) in terms of
sin x, sin y, cos x, & cos y.
Identities related to sin2x, cos2x, tan2x, sin3x, cos3x and tan3x. General solution of trigonometric equations of the
type sin? = sina, cos? = cosa and tan? = tana. Proof and simple application of sine and cosine formula.

ALGEBRA (I)
1. Principle of Mathematical Induction :
Processes of the proof by induction, motivating the application of the method by looking at natural numbers as the
least inductive subset of real numbers. The principle of mathematical induction and simple applications.
2. Complex Numbers and Quadratic Equations:
Need for complex numbers, especially v-1, to be motivated by inability to solve every quadratic equations. Brief
description of algebraic properties of complex numbers. Argand plane and polar representation of complex numbers.
Statement of Fundamental Theorem of Algebra, solution of quadratic equations in the complex number system.
3. Linear Inequalities:
Linear inequalities. Algebraic solutions of linear inequalities in one variable and their representation on the number
line. Graphical solution of linear, inequalities in two variables. Solution of system of linear inequalities in two
variables – graphically.
4. Permutation & Combination :
Fundamental principle of counting. Factorial n. (n!) Permutation and combinations, derivation of formulae and their
connections, simple applications.
5. Binomial Theorem:
History, statement and proof of the binomial theorem for positive integral indices. Pascal’s triangle, General and
middle term in binomial expansion, simple applications.
6. Sequence & Series:
Sequence and Series. Arithmetic progression (A.P.) arithmetic mean (A.M.) Geometric progression (G.P.), general
term of a G.P. Sum of n terms of a G.P., geometric mean (G.M.), relation between A.M. and G. M. Sum to n terms
of the special series
29
3. Introduction to Three Dimensional Geometry :
Coordinate axes and coordinate planes in three dimensions, Coordinates of a point. Distance between two points
and section formula.

CALCULUS (I)
1. Limits and Derivatives :
Derivative introduced as rate of change both as that of distance function and geometrically, intuitive idea of limit.
Definition of derivative, relate it to slope of tangent of the curve, derivative of sum, difference, product and quotient
of functions. Derivatives of polynomial and trigonometric functions.

MATHEMATICAL REASONING
1. Mathematical Reasoning
Mathematically acceptable statements. Connecting words / phrases – consolidating the understanding of “if and
only if (necessary and sufficient) condition”, “implies”, “and / or”, “implied by”, “and”, “or”, “there exists” and their
use through variety of examples related to real life and Mathematics. Validating the statements involving the
connecting words – difference between contradiction, converse and contrapositive.

STATISTICS & PROBABILITY (I)
1. Statistics :
Measure of dispersion; mean deviation, variance and standard deviation of ungrouped / grouped data. Analysis of
frequency distributions with equal means but different variances.
2. Probability :
Random experiments: outcomes, sample spaces (set representation). Events: occurrence of events, ‘not’, ‘and’ ‘or’
events, exhaustive events, mutually exclusive events Axiomatic (set theoretic) probability, connections with the
theories of earlier classes. Probability of an event, probability of ‘not’ ‘and’ & ‘or’ events.

* RELATIONS AND FUNCTIONS.
1. Relations and Functions :
Types of relations : reflexive, symmetric, transitive and equivalence relations, One to one and onto functions,
composite functions inverse of a function, Binary operations.
2. Inverse Trigonometric Functions :
Definition, range, domain principal value branches. Graphs of inverse trigonometric functions Elementary properties
of inverse trigonometric functions.

ALGEBRA (II)
1. Matrices :
Concept, notation, order, equality types of matrices zero matrix transpose of a matrix, symmetric and skew symmetric
matrices, Addition, multiplication and scalar multiplication of matrices, simple properties of addition, multiplication
and scalar multiplication. Non-commutativity of multiplication of matrices and existence of non-zero matrices whose
product is the zero matrix (restrict to square matrices of order 2). Concept of elementary row and column operations,
Invertible matrices and proof of the uniqueness of inverse, if it exists; (Here all matrices will have real entries).
2. Determinants :
Determinant of a square matrix (up to 3 x 3 matrices), properties of determinants, minors, cofactors and applications
of determinants in finding the area of a triangle. Adjoint and inverse of a square matrix. Consistency, inconsistency
and number of solutions of system of linear equations by examples, solving system of linear equations in two or
three variables (having unique solution) using inverse of a matrix.

CALCULUS (II)
1. Continuity and Differentiability :
Continuity and differentiability, derivative of composite functions, chain rule, derivatives of inverse trigonometric
functions, derivative of implicit function. Concept of exponential and logarithmic functions and their derivatives.
Logarithmic differentiation. Derivative of functions expressed in parametric forms. Second order derivatives, Rolle’s
and Lagrange’s Mean Value Theorems (without proof) and their geometric interpretations.
2. Applications of Derivatives :
Applications of derivatives : rate of change, increasing/decreasing functions, tangents & normals, approximation,
maxima and minima (first derivative test motivated geometrically and second derivative test given as a provable
tool). Simple problems (that illustrate basic principle and understanding of the subject as well as real-life situations).
30
3. Integrals :
Integration as inverse process of differentiation. Integration of a variety of functions by substitution by partial
fractions and by parts, only simple integrals. Definite integrals as a limit of a sum, Fundamental Theorem of Calculus
(without proof). Basic properties of definite integrals and evaluation of definite integrals.
4. Applications of the Integrals :
Applications in finding the area under simple curves, especially lines, areas of circles / parabolas / ellipses (in
standard form only), area between the two above said curves (the region should be clearly identifiable).
5. Differential Equations :
Definition, order and degree, general and particular solutions of a differential equation. Formation of differential
equation whose general solution is given. Solution of differential equations by method of separation of variables,
homogeneous differential equations of first order and first degree. Solutions of linear differential equation of the
type:
dy
____ + py = q, where p and q are functions of x.
dx

VECTORS AND THREE DIMENSIONAL GEOMETRY (II)
1. Vectors :
Vectors and scalars, magnitude and direction of a vector. Direction cosines / ratios of vectors. Types of vectors
(equal unit zero parallel and collinear vectors), position vector of a point, negative of a vector, components of a
vector, addition of vectors, multiplication of a vector by a scalar, position vector of a point dividing a line segment
in a given ratio. Scalar (dot) product of vectors, projection of a vector on a line. Vector (cross) product of vectors.
2. Three – dimensional Geometry :
Direction cosines / ratios of a line joining two points. Cartesian and vector equation of a line, coplanar and skew
lines, shortest distance between two lines. Cartesian and vector equation of a plane. Angle between (i) two lines,
(ii) two planes, (iii) a line and a plane. Distance of a point from a plane.

LINEAR PROGRAMMING
1. Linear Programming :
Introduction, definition of related terminology such as constraints, objective function, optimization, different types
of linear programming (L.P.) problems, mathematical formulation of L.P. problems, graphical method of solution for
problems in two variables, feasible and infeasible regions, feasible and infeasible solutions, optimal feasible solutions
(up to three non-trivial constaints).

PROBABILITY (II)
1. Probability :
Multiplication therorem on probability. Conditional probability, independent events, total probability, Baye’s theorem,
Random variable and its probability distribution, mean and variance of haphazard variable. Repeated independent
(Bernoulli)trials and Binomial distribution.

Biology syllabus to be covered for BCECE 2019,

DIVERSITY IN LIVING WORLD
– Diversity of living organism.
– Classification of the living organisms (five kingdom classification, major groups principles of classification within
each kingdom).
– Systematics and binomial system of nomentlature.
– Salient features of animal (non chlordates up to phylum level, and chlordates up to class level) and plant (major
groups; Angiosperms up to subclass) classification.
– Botanical garden, herbaria, zoological parks museums.

STRUCTURAL ORGANISATION IN ANIMALS AND PLANTS
Tissues in animals and plants.
Morphology, anatomy and functions of different parts of flowering plants : Root, stem, leaf, inflorensence, flower,
fruit and seed.
Morphology, anatomy and functions of different systems of an annelid (earthworm), an insect (cockroach) and an
amphibian (frog.)

CELL : STRUCTURE AND FUNCTION
Cell : Cell wall, cell membrane and cell organelles (plastids, mitochondria, endoplasmic reticulum, Golgi bodies/
dictyosomes, ribosomes, lysosomes, vacuoles, centrioles) and nuclear organisation.
Mitosis, meiosis, cell cycle.
Basis chemical constituents of living bodies.
Structure and functions of carbohydrates, proteins, lipids and nucleic acids.
Enzymes : Types, properties and function.

PLANT PHYSIOLOGY
Movement of water, food, nutrients and gases.
Plants and Water : Mineral nutrition
Respiration
Photosynthesis
Plant growth and development

HUMAN PHYSIOLOGY
Digestion and absorption.
Breathing and respiration
Body fluids and circulation
Excretory products and elimination
Locomotion and movement
Control and coordination

* SEXUAL REPRODUCTION
– Pollination and fertilization in flowering plants.
– Development of seeds and fruits.
– Human reproduction : reproductive system in male and female, menstrual cycle. Production of gametes, fertilization,
implantation, embryo development,, pregnancy and parturation.
– Reproductive health-birth control, contraception and sexually transmitted diseases.

GENETICS AND EVOLUTION
– Mendelian inheritance.
– Chromosome theory of inheritance, deviations from Mendelian ratio (gene interaction-Incomplete dominance, codominance,
complementary genes, multiple alleles.)
– Sex determination in human beings: XX, XY.
– Linkage and crossing over.
– Inheritance pattern of haemophilia and blood groups in human beings.
32
– DNA : replication, transcription, translation.
– Gene expression and regulation.
– Genome and Human Genome Project.
– DNA fingerprinting.
Evolution : Theories and evidences.

BIOLOGY AND HUMAN WELFARE
– Animal husbandry.
– Basic concepts of immunology, vaccines.
– Pathogens, Parasites.
– Plant breeding, tissue culture, food production.
– Microbes in household food processing, industrial production, sewage treatment and energy generation.
– Cancer and AIDS.
– Adolescene and drug/alcohol abuse.

BIOTECHNOLOGY AND ITS APPLIATIONS
– Recombinant DNA technology.
– Applications in Health, Agriculture and Industry.
– Genetically modified (GM) organism; biosafety issues.
– Insulin and Bt cotton.

ECOLOGY & ENVIRONMENT
Ecosytems: components, types and energy flow.
Species, population and community.
Ecological adaptations.
Centres of diversity and conservation of biodiversity, national parks and sanctuaries.
Environmental issues.

BCECE Selection Procedure and Counselling | Method for ranking students in BCECE

Candidates qualified on the basis of BCECE-2018 and declared eligible for counselling can participate for e-counselling. Candidates must fulfil the eligibility criteria, reservation policies and other concerned instructions as mentioned in the prospectus of BCECE-2018. For more details can be referred to the Prospectus of BCECE-2018 uploaded on our website :
bceceboard.bihar.gov.in.

Step – 1 Registration: Candidates can do the registration from any computer with having the internet facility. Following the instructions are given below:
I.
i. Before starting registration, candidates must thoroughly read the Instructions given on the e-counselling portal bceceadmissions.nic.in and Prospectus of BCECE-2018 downloaded from our website bceceboard.bihar.gov.in.
ii. Visit the website bceceadmissions.nic.in and click at New Registration.
iii. Read the candidate’s Agreement Page carefully and click on the “I Agree” option to proceed further.
iv. Register yourself by selecting the appropriate course and then enter Roll number, Registration no., Name, Date of Birth as mentioned in admit card and of BCECE2018 Security code as written below in rectangular box i.e. captcha. The candidate is advised not to disclose any of this information to anyone.
v. Click on “Submit” button to proceed further.

II.
i. In this screen, all the data provided by the candidate during submission of application will be displayed and some new fields will be asked to be filled in by the candidate in the case of I.Sc. / XII (10+2) as Passing Status “Appearing”.
Then, select passed radio button if you have passed and enter your marks as asked on the screen. If Result status of I.Sc. / XII (10+2) of the candidate is not passed, then the candidate will not be eligible for participating in the e-counselling process.
ii. Now the candidate has to enter the password and again re-enter the same password in the Confirm Password box. Bihar combined Entrance competitive Examination Board I.A.S Association Building, Near Patna Airport, Patna-800014,
Website : bceceboard.bihar.gov.in

iii. The Password must be of 8-13 characters long and must contain at least one capital letter [A-Z], one small letter [a-z], one Numeric Character [0-9] and one special character [!,@,#,$,%,^,& and *]. For example Vikash@123.
iv. Remember the entered Password and keep it confidential. This password shall be
used in future for choice filling and viewing seat allocation result details etc.

III. 
i. The candidate can verify the details of registration. The candidate will get all information by SMS and also OTP for locking your choice on the mobile no. registered during online application.
ii. There is no provision to edit any kind of data/information.
iii. Click confirm registration box to complete the registration process.
iv. No other chance will be given to such candidates who are eligible for the counselling but did not complete Registration Process within Scheduled Date & Time.

Step – 2. Choice Filling :

i. After successful registration, the candidate has to click the “Fill Choice Button” given in the “MENU” Bar on the screen.
ii. Next Screen will come with some instructions. Candidates are advised to read the instructions carefully and then proceed to the next screen for “Choice Filling”.
iii. This screen contains two blocks. The left block contains a list of all colleges and branches in alphabetical order. In this block, the colleges can be listed according to Govt./ Private or All and Colleges by District Wise / Branch Wise. The Right Block contains the choices filled in by the candidate. The candidate can ADD his / her choices of colleges and branches from the left block by Addition of One by One using ADD button). Each candidate is advised to give maximum no of choices.
iv. Candidates should arrange the filled in choices in order of their preference of College / Branch. One college with one branch is treated as one choice. For example, Muzaffarpur Institute of Technology, Civil Engineering Branch should be treated as one choice, Similarly, Bhagalpur College of Engineering, Mechanical Engineering Branch should be treated as another choice and so on. He / She may use the SWAP and MOVE options to change the priority of already filled in choices.
v. For Economically backward candidates, the choices of colleges and branches for both Economically Backward (For example, Muzaffarpur Institute of Technology, Mechanical Engineering-EB) and the non-EB seats (for example, Muzaffarpur Institute of Technology, Mechanical Engineering) will be offered in the choice filling screens. The Economically Backward Candidates can fill in their choices from among the above list of EB and non-EB seat matrix mentioning their preferences.
Note: The Economically backward (EB) Scheme is applicable to the Son / Daughter of those Parents whose annual income from all sources is less than Rs. 4.5 Lakhs. This scheme is applicable only to the candidates who are Permanent Resident of Bihar and whose parents satisfy the above-mentioned income criteria (by submitting income certificate duly signed by Competent Authority and Produce the same at The Reporting Centre).
vi. Select as many choices of Institutions and branches as available on a priority basis to have a better option for allotment of a seat in the process. During the choice filling process, save the choices at regular intervals using Save Choice button. Always give the best choice as first and follow in that sequence. Now click on the Save & Exit button for further process.
vii. No other chance will be given to such candidates who have registered but not submitted their choice within scheduled Date & Time.
viii. Registration and choice filling is a one-time option for all those candidates who are included in the published result of PCM group of BCECE-2018. No chance will be given at the time of 2nd / 3rd round of seat allotment.

Step – 3: Choice Locking By OTP

(i) After doing the above exercises, the choice Locking facility will be activated. Once Locking System is activated, you first check whether you have made correct choices as per your requirement. If you are satisfied then click “Lock Choices” button. Enter your password for locking the choice and click on the Submit button. Your choices given are Locked. If you want to modify or add/remove some choices, then click on Unlock choices button. On this action also enter your password for unlocking the choice and click on the Submit button. If found correct, then the choices will get unlocked and modify your choices as per your requirement. After modification follows the same above steps to lock your choices.
(ii) If you could not lock your choice due to any reason, your last exercised choice will be locked automatically in the server when the given time expires.
(iii) After completing the choice filling and locking, click on “Print Locked Choice” button to take a print out of Filled in choice slip for your reference.

Step – 4: 1st Round Seat Allotment. The Allotment of Seat will be based on the best fitment of the rank, choice and category / reservation of the candidates.

(i) The 1st round seat allotment will be available as per the scheduled date and time is given on BCECE Board website and published in Newspaper.
(ii) 1st round seat Allotment may be intimated through SMS to the candidates registered mobile no. and can be seen on website bceceadmission.nic.in after Login or on Board’s website bceceboard.bihar.gov.in.
(iii) Candidate can see his / her 1st Round allotted seat position from the website and download and get the printout of Allotment Letter in 3 copies.
(iv) Candidates are advised to report at Reporting Centre within scheduled date and time otherwise their allotment will be cancelled for which candidate will be personally responsible and will not be given chance for participating in the further round of counselling.
(v) In auto up-gradation System, this position will remain as such or he / she will be promoted to upper choice in next round of allotments, so be careful while giving the choice. The better-preferred choice should be at the upper level.
(vi) Candidates not allotted any seat in this round are required to wait for next round for any upgraded allotment.
(vii) After physical reporting of the allotted candidates to their respective Reporting Centre at the end of each round, the e-counselling will be completed and a seat vacancy report will be generated.
(viii) No De-reservation of seats will be applicable on the basis of vacant seats.

Step – 5: Admission Fee Payment

(i) For Admission Fee the candidate must report to Reporting Centre or concerned college with a Demand Draft of Rs 2500/- in favour of the principal of concerned Institution or Cash.
(ii) Any allotted candidate is allowed to withdraw, if they are not satisfied with the allotment or taken admission elsewhere or of any reason he/she is not interested to take admission in the allotted institution / College within the declared time as per AICTE norms. After Declared time claim for Refund or withdrawal will not be allowed/entertained.

Step – 6 Document verification at Reporting Centre.
(i) Report at the assigned Reporting Centre in scheduled date and time with
following documents:
(a) Copy of downloaded Part-A & Part-B of Application form
(b) Original Admit Card
(c) Copy of Rank Card
(d) Copy of downloaded Allotment Letter (3 copies)
(e) Six copies of Passport Size Photograph (as uploaded in online
Application Form)
(f) 10th Board Certificate / Matric/equivalent Certificate and Admit Card as proof of age & Identity.
(g) I.Sc / XII / 10+2 Pass certificate / Marks sheet and Admit Card.
(h) School / College Leaving certificate (original college / school leaving certificate is mandatory during admission.
(i) Aadhar card for ID Proof.
(j) Residential certificate for a native of Bihar issued by Concerned C.O of Permanent residence.
(k) Caste Certificate issued by concerned C.O. of Permanent residence (In case of reserve category candidates)
(l) * Character Certificate issued by Head of Institute last attended.
(m) * Income certificate issued by concerned C.O. of Permanent residence. (In case of Economically Backward)
(n) * Refugee Registration certificate issued by concerned DM (or ADM authorized by DM) / Refugee Registration officer.
(o) * Certificate showing that the applicant’s parent is an employee of the Govt. of Bihar issued by concerned Employer.
(p) * Certificate showing that the applicant’s parent is an employee of the Govt. of India and Posted in Bihar or an employee of any Public Sector undertaking of the Govt. of India and Posted in Bihar issued by the concerned employer.
(q) * Certificate showing that the applicant’s parent is an employee of the United Nations organization and that he/she is at present posted in Bihar issued by concerned Employer.
(r) * Such Candidates who have not studied in Bihar but claim eligibility on ground of Permanent / 10 years or more of continuous residence in Bihar in respect of their Parents must also furnish a certificate from the institute where he/she is studying for the qualifying examination indicating the permanent address recorded in the admission register of that institute issued by the concerned Principal of the institute.
(s) * Certificate from service men’s quota (SMQ), Clearly mentioning the relationship of the candidate as mentioned in Para 5.8 of the Prospectus of BCECE-2018.
(t) * Certificate for Disable Quota (DQ) as mentioned in Para 5.7 of the Prospectus of BCECE-2018.

* Note:- To be furnished, which ever applicable.

(ii) After Successful document verification, the candidate will be admitted by college authority.
(iii) Candidates allotted a seat but not reported to Reporting centre for document verification within his / her scheduled time, his / her allotment will be cancelled and the seat allotted to him/her will be considered as the vacant seat for next round of allotment.
(iv) When an allotted candidate has got successfully verified his / her document in 1st round then in further rounds, on the basis of up-gradation (if he given the choice of up-gradation) he will have to report at his concerned college with new allotment letter.
(v) Candidates who have collected their Allotment letter and successfully done their document verification and have opted for “No up gradation” at the Reporting Centre or Choice for Auto up-gradation as “No” during the time of Registration and Choice filling are advised to proceed to the allotted Institution/college for admission.

Step – 7. 2nd Round Seat Allotment
(i) No fresh Registration shall be allowed in this round. But if 1st result exhaust & situation warrants, further merit list / result may be published. Then registration and Choice filling will be allowed to fresh candidates only, who were not included in 1st published merit list / result.
(ii) The following types of candidates are eligible for seat allotment / up-gradation.
(a) Type – I : All Registered candidates who have successfully filled their choices and not allotted any seat in the first round of seat allotment must visit the website : bceceboard.bihar.gov.in / bceceadmissions.nic.in as per counselling schedule.
(b) Type – II : All candidates who were allotted a seat in the first round of counselling and also got their documents verified and hence were declared as successfully admitted candidates. Such candidates must visit the website as per counselling schedule for knowing the up-gradation of seat allotted to him / her in the first round.
(c) Type – III : Fresh candidates whose result were not published for participating in 1st round of counselling but after exhaust of merit list published, 2nd result may be published for participating in 2nd round of counselling on the basis of merit. (If required).
(iii) The allotment of seat will be based on best fitment of the rank, choice and reservation category of the candidates.
(iv) The 2nd round seat allotment will be available as per the scheduled date and time given on BCECE Board website and published in newspaper.
(v) 2nd round seat allotment may be intimated through SMS to the candidate’s Registered Mobile no. and can be seen in website bceceadmissions.nic.in in after Login or on Board’s website: bceceboard.bihar.gov.in.
(vi) Candidate can see his / her 2nd round allotted seat position from the website may be upgraded to the higher priority or remain same as the previous allotment depending on the choice number, rank and availability of seat. Unallotted candidates of the previous 1st round allotment may get an allotment depending on his / her choice, rank and availability of seat.
(vii) Candidates not allotted any seat in this round are not to wait for 3rd round allotment.
(viii) All newly allotted candidates have to follow Step-4 to Step-6 to remain in the Process and will be eligible for next round allotment. Newly allotted candidates not followed step 4 to step 6 will not be considered for admission. Who has in further rounds of allotment.
(ix) At this stage, if the candidate desires to withdraw from the counselling process, he/she should proceed to report centre where he/she had got verified his / her documents within the specified date and claim for refund of Part Admission fee as deposited.
(x) Candidates whose documents have been successfully verified and paid who has the Part admission Fee and given their choice for auto up-gradation will be eligible for 3rd Round Allotment through auto up-gradation.
(xi) After Physical Reporting of the allotted candidates to their respective reporting Centre at the end of each round, the e-counselling will be completed and a seat vacancy report will be generated.
(xii) No De-reservation of seats will be applicable on the basis of vacant seats.
(xiii) If candidate published in 2nd Result did not complete the Registration & choice

Locking Process. They will not be given other chance to participate for the further round of counselling.

Step – 8: 3rd Round Seat Allotment
(i) No Fresh Registration shall be allowed in this round. But if either 1st and 2nd both result in exhaust & situation warrants, further merit list/result may be published. Then Registration and Choice filling will be allowed to fresh candidates only, who were not included in 1st and 2nd published merit list/result.
(ii) The following types of candidates are eligible for seat allotment / up-gradation.
(a) Type – I: All Registered candidates who have successfully filled their choices and not allotted any seat in the first round or 2nd round of seat allotment must visit the website: bceceboard.bihar.gov.in / bcece admissions.nic.in as per counselling schedule.
(b) Type – II: All candidates who were allotted a seat in the first or second round of counselling and also got their documents verified and hence were declared as successfully admitted candidates must visit the website as per counselling schedule for knowing the up-gradation of seat allotted to him/her in the first round or second round.
(c) Type – III: Fresh candidates whose result were not published for participating in 1st round or 2nd round of counselling but published for participating in the 3rd round of counselling on the basis of merit. (If required). The allotment of seat will be based on best fitment of the rank, choice and reservation category of the candidates.
(iii) The 3rd round seat allotment will be available as per the scheduled date and time is given on BCECE Board website and published in the newspaper.
(iv) 3rd round seat allotment may be intimated through SMS to the candidate’s Registered Mobile no. and can be seen in website bceceadmissions.nic.in in after Login or on Board’s website: bceceboard.bihar.gov.in.
(v) Candidate can see his / her 3rd round allotted seat position from the website may be upgraded to a higher priority or remain the same as previous allotment depending on the choice number, rank and availability of seat. Unallotted candidates of the previous round allotment may get an allotment depending on his / her choice, rank and availability of seat.
(vi) Candidates not allotted any seat in this round will not be allotted due to final seat allotment.
(vi) All newly allotted candidates have to follow Step-4 to Step-6 to remain in the Process and will be eligible for next round allotment. Newly allotted candidates not following step 4 to step 6 will not be considered for admission. They will not be considered in further rounds of allotment.
(vii) At this stage, if the candidate desires to withdraw from the counselling process, he/she should proceed to report centre where he/she had got verified his/her documents within the specified date and claim for refund of Part Admission fee as deposited.
(viii) After Physical Reporting of the allotted candidates to their respective reporting Centre at the end of each round, the e-counselling will be completed and a seat vacancy report will be generated.
(ix) No De-reservation of seats will be applicable on the basis of vacant seats.
(x) If candidate published in 3rd Result and not completing the Registration & choice Locking Process will not be given other chance to participate for the further round of counselling.
Note: Format of Income certificate, Residential Certificate and DQ Certificate can be
obtained from the Prospectus of BCECE.

 

 

 

Print Friendly, PDF & Email

Leave a Reply